6V/12V Smart Battery Charger and Maintainer 6-Amp Full Automatic 6-Stages Trickle Charging with Clamps for Car, Motorcycle, Lawn Mower, Boat RV, SUV, ATV, Sealed Lead Acid Battery-Repair Batteries
Item: ABC02
Input Voltage: AC 100-120V 50/60Hz
Dimensions: 172*62*50mm
Input Wire Length: 90cm
Output Wire Length: 170cm
Output Current: DC 6V-2A/ 12V-6A
Power: 90W
For Battery Capacity: 4Ah-100Ah
For Battery Voltage: 6V/12V
Charging Voltage: 6V mode (Normal:7.2V Winter Mode: 7.4V)
12v Mode (Normal:14.6V Winter Mode: 14.8V)
For Battery Type: Gel, Wet, MF and all other 6V/12V lead-acid batteries
Suitable for:
① 6V or 12V Batteries: AGM, SLA, GEL, WET, VRLA, etc.,
② Scooter, ATV, Jet Ski, Snowmobile, Motorcycle, Lawn Mower, Car, SUV, RV, Pickup, Tractor, Boat, etc.
PRODUCT DESCRIPTION
Compatibility
Works with all types of 6V and 12V lead-acid batteries that are less than 100Ah, such as AGM, GEL, SLA, Flooded (WET), Calcium type deep cycle automotive or marine 4.0Ah-100Ah 12V battery. iGoBatt battery maintainer charger is a great choice for cars, trucks (small), motorbike, lawn mowers, tricycles, electric vehicles, agricultural vehicles, off-road vehicles, pickup trucks, boats, yachts, and motorboats.
6-Stage Automatic Charging
12V battery charger operated with 6-stage automatic charging process by MCU controller: desulfurization, soft start, bulk, absorption, battery test, floating/trickle to indicate quantity of electricity and monitor the whole charging progress. Stops automatically when the battery is fully charged. (Cautions: Only 12v battery supports trickle charging)
Smart Battery Maintenance
Maintain various types of 6V or12V lead-acid batteries up to 100Ah. Intelligent control system with strong pulse repair technology, removes vulcanization, repairs slightly damaged batteries, reduces water loss, and can extend the battery life. Makes your battery more powerful.
Intelligent Detection & Intuitive Lcd Screen
When low-voltage, vulcanization, or battery capacity loss is detected, LST battery maintainer charger directly prompts the user to repair and charge the battery or if the battery has lost its value, and is not repairable. LCD screen displays charging status, battery voltage/ current, and battery status clearly, providing visual feedback and diagnostic information even when in maintenance mode.
Multiple Safety Protection Functions
Made of fireproof materials. It has multiple security protections, such as over-current protection, over-charge protection, over-heat protection, reverse connection protection, short circuit protection, fully charged stop protection, etc.
PLEASE NOTE
Product packaging and material may contain more and/or different information from the website, including the product description or other information. Always read labels, warnings, and directions and other information provided with the product before using or consuming a product.
You may find Chinese characters on the back and side of this product as a sample order. This will not affect the use or functionality of the product. Please refer to the included user manual for detailed instructions.
If you have any questions regarding this product, please contact us by email.
SPECIAL FEATURES
- Manually select the need of 12V or 6V output, making the use more convenient and safe
- Intelligent 6-stage charging
- Unique winter mode for more efficient charging in winter
- Removes vulcanization (desulfurization), repairs slightly damaged battery
- Pulse Maintenance extends battery life
- Smart Detection
- Suitable for 6V or 12V Batteries
- Rated input voltage: 100v-120V
- High-end display screen can accurately display the charging status
Intelligent Temperature Control
Switch to winter mode when the temperature is below 15°C (59℉)
Good Cooling System
16-layer fin cooling aluminum sheets and fans are used for cooling, which makes the cooling performance more powerful!
Automatic Stop After Full Charged
Self-stop after full charge, safer to use
Intelligent Charging:
1.Intelligentn 6-stage charging, desulfation, soft start, bulk, absorption, battery test, floating/trickle.
2.Intelligent MCU controller unit, automatically stop output when fully charged.
3.Unique winter mode for better charging effect in winter
Repair/Maintenance:
1.Remove vulcanization (desulfation), repair slightly damaged battery
2. Pulse Maintenance extends battery life.
Smart Detection:
1.Automatically determine if the battery is damaged. (after charging for 15 minutes)
2.Automatic identification of 6V or 12V battery
Suitable for 6V or 12V Batteries
– AGM, SLA, GEL, WET, VRLA, etc.
– Scooter, ATV, Jet Ski, Snowmobile, Motorcycle, Lawn Mower, Car, SUV, RV, Pickup, Tractor, Boat, etc.
Others:
1.Rated input voltage: 100V-120V, which can be used in any country in the world.
2.Fire retardant materials, V0 class fire retardant engineering plastics, reduce fire hazards, safety is the most important!
3.High-end display screen can display accurately, even in the extreme environment of low temperature -20℃ (-4℉) or high temperature 50℃ (122℉).
SPECIFICATIONS DETAIL
| Model Number: | ABC02 |
| Power: | 90W |
| Input Voltage: | AC 100-120V 50/60Hz |
| Dimensions: | 172*62*50mm |
| Input Wire Length: | 90cm |
| Output Wire Length: | 170cm |
| Output Current: | DC 6V-2A/ 12V-6A |
| For Battery Capacity: | 4Ah-100Ah |
| For Battery Voltage: | 6V/12V |
| Charging Voltage: | 6V Mode (Normal:7.2V Winter Mode: 7.4V) |
| For Battery Type: |
Gel, Wet, MF and all other 6V/12V lead-acid batteries |
|
Suitable for: |
① 6V or 12V Batteries: AGM, SLA, GEL, WET, VRLA, etc., |
SPECIFICATIONS IMAGES
PLUGS FOR OPTIONS
PACKAGE DETAIL
1x ABC02 Battery Charger
1x AC Adapter
1x Pair of Smart Clamps
1x User Manual
iGoBatt always offers professional and friendly customer assistance so that you could better understand and use the product.